Graduate Calendar 2008-2009

Mechanical and Aerospace Engineering

Mackenzie Building 3135
Telephone: 613-520-5684
Fax: 613-520-5715
Email: maeinfo@mae.carleton.ca
Web site: www.mae.carleton.ca

The Department

Chair of the Department: Jonathan Beddoes
Associate Chair (Graduate Studies): Andrei Artemev

The following graduate degree programs are offered by the Department of Mechanical and Aerospace Engineering:

• Masters of Applied Science Aerospace Engineering
• Masters of Applied Science Biomedical Engineering
• Masters of Applied Science Materials Engineering
• Masters of Applied Science Mechanical Engineering
• Masters of Engineering Aerospace Engineering
• Masters of Engineering Materials Engineering
• Master of Engineering Mechanical Engineering
• Doctor of Philosophy Aerospace Engineering
• Doctor of Philosophy Mechanical Engineering

The requirements for completion of the Aerospace, Materials and Mechanical Engineering degrees are summarized in the Ottawa-Carleton Institute for Mechanical and Aerospace Engineering section of this calendar.

The M.A.Sc. in Biomedical Engineering is offered in cooperation with the Department of Systems and Computer Engineering, the School of Computer Science and the Department of Physics. For further information, see the Ottawa-Carleton Institute for Biomedical Engineering section in this Calendar.

Research in the Department spans the spectrum of mechanical and aerospace engineering, with a focus on:

• applied dynamics
• aerodynamics and fluid mechanics
• aero-structures
• bio-medical engineering
• combustion and heat transfer
• materials and manufacturing processes
• solid and fracture mechanics
• robotics, controls, guidance and navigation
• digital image processing
• space and satellite technologies

Cross-disciplinary research within Mechanical and Aerospace Engineering focuses on specific application issues, research on advancing gas turbine technology being one major and longstanding example. The department's gas turbine technology program originated nearly 40 years ago with some of the department's first faculty members, who had extensive gas turbine industrial experience. This research effort is arguably one of the largest and most effective university-based gas turbine technology research groups today. This research includes the following core topics:

• internal aerodynamics
• combustion
• system design and performance,
• high temperature materials and coatings technology
• repair and overhaul methods and procedures

This research is supported with collaboration from external research institutions, major Canadian and foreign suppliers, manufacturers, users, and repair and overhaul companies.

Other cross-disciplinary application-specific research areas include:

• unmanned aerial vehicle technology including design, performance, aerodynamics, and navigation and control,
• simulation of vehicle performance,
• vehicle simulation for training, including graphics database management, projection, kinematic and dynamic modeling, washout, and control of motion platforms
• fatigue and fracture mechanics research
• bio-medical engineering and design of medical devices
• two-phase flows in applications ranging from heat pipes to refrigeration cycles
• design and implementation of numerical methods for stress analysis, heat transfer, computational fluid dynamics, materials processing and vehicle simulation
• rotorcraft, structures, dynamics, aerodynamics and aeroelasticity

Extensive activity and expertise in computer-aided analysis supports this research, including computational fluid dynamics and finite and boundary element methods, computer-aided design and computer-integrated manufacturing.

The Department maintains extensive laboratories equipped with a wide range of specialized equipment. Research facilities include several wind tunnels including a transonic blowdown wind tunnel, a Bridgman vacuum furnace, fully operational gas turbine engines, servo-hydraulic materials testing equipment, extensive machine shop capability and an air plasma spray facility. To complement this research equipment, faculty maintain strong collaborative research links with many external government and industrial research centres allowing access to additional specialized equipment and facilities.

Several computer networks support departmental research, with an extensive array of design, analysis and simulation software. Access is also available to the High Performance Computing Virtual Laboratory (HPCVL) jointly operated by Carleton University, The Royal Military College, Queen's University and the University of Ottawa. In 2002, HPCVL was ranked among the fastest 200 computers in the world, and is upgraded on an ongoing basis.

Graduate Courses

Not all of the following courses are offered in a given year. Consult the Ottawa-Carleton Joint Institute for Mechanical and Aerospace Engineering (OCIMAE) website for course offerings: www.ocimae.ca.

University of Ottawa course numbers (in parentheses) follow the Carleton course number and credit information.

MECH 5000 [0.5 credit] (MCG 5300)

Fundamentals of Fluid Dynamics

Differential equations of motion. Viscous and inviscid regions. Potential flow: superposition; thin airfoils; finite wings; compressibility corrections. Viscous flow: thin shear layer approximation; laminar layers; transition; turbulence modeling. Convective heat transfer: free versus forced convection; energy and energy integral equations; turbulent diffusion. Also offered at the undergraduate level, with different requirements, as AERO 4302, for which additional credit is precluded.

MECH 5001 [0.5 credit] (MCG 5301)

Theory of Viscous Flows

Navier-Stokes and boundary layer equations; mean flow equations for turbulent kinetic energy; integral formulations. Stability, transition, turbulence, Reynolds stresses; separation. Calculation methods, closure schemes. Compressibility, heat transfer, and three-dimensional effects.

MECH 5003 [0.5 credit] (MCG 5303)

Incompressible Non-Viscous Flow

The fundamental equations and theorems for non-viscous fluid flow; solution of two-dimensional and axisymmetric potential flows; low-speed airfoil and cascade theory; wing lifting-line theory; panel methods.

MECH 5004 [0.5 credit] (MCG 5304)

Compressible Non-Viscous Flow

Steady isentropic, frictional, and diabatic flow; shock waves; irrotational compressible flow, small perturbation theory and similarity rules; second-order theory and unsteady, one-dimensional flow.

MECH 5008 [0.5 credit] (MCG 5308)

Experimental Methods in Fluid Mechanics

Fundamentals of techniques of simulation of fluid dynamic phenomena. Theoretical basis, principles of design, performance and instrumentation of ground test facilities. Applications to aerodynamic testing.

MECH 5009 [0.5 credit] (MCG 5309)

Environmental Fluid Mechanics Relating to Energy Utilization

Characteristics of energy sources and emissions into the environment. The atmosphere; stratification and stability, equations of motion, simple winds, mean flow, turbulence structure and dispersion near the ground. Flow and dispersion in groundwater, rivers, lakes and oceans. Physical and analytical modeling of environmental flows.

MECH 5100 [0.5 credit] (MCG 5310)

Performance and Economics of Aircraft

Aircraft performance analysis with emphasis on factors affecting take-off, landing and economic performance; high lift schemes; operating economics.

MECH 5101 [0.5 credit] (MCG 5311)

Dynamics and Aerodynamics of Flight

Static stability theory. Euler's equations for rigid body motion; the linearized equations of motion; stability derivatives and their estimation. Longitudinal and lateral dynamic response of an aircraft to control and disturbance. Also offered at the undergraduate level, with different requirements, as AERO 4308, for which additional credit is precluded.

MECH 5104 [0.5 credit] (MCG 5314)

Ground Transportation Systems and Vehicles

Performance characteristics, handling and directional stability, ride comfort and safety of various types of ground vehicle systems including road vehicles, terrain-vehicle systems, guided transport systems, and advanced ground transport technology.

MECH 5105 [0.5 credit] (MCG 5315)

Orbital Mechanics and Space Control

Orbital dynamics and perturbations due to the Earth's figure, the sun, and the moon with emphasis on mission planning and analysis. Rigid body dynamics applied to transfer orbit and on-orbit momentum management and control of spacecraft. Effects of flexible structures on a spacecraft control system.

MECH 5106 [0.5 credit] (MCG 5121)

Space Mission Analysis and Design

Review of solar system and space exploration. Space mission design and geometry. Analysis of orbit design, transfers, interplanetary trajectories. Effect of environment on spacecraft design. Space propulsion and launch vehicle design. Launch sequence, windows, cost. Reusable launch systems.
Also offered at the undergraduate level, with different requirements, as AERO 4802.

Precludes additional credit for MAAE 4906 (Section B) if taken between 1994-1995 and 2003-2004 inclusive, MECH 5805 taken between 2002-2003 and 2003-2004 inclusive, MAAE 5700 (Section L) taken between 1994-1995 and 1996-1997 inclusive, and MAAE 5805 taken between 1999-2000 and 2001-2002 inclusive.

MECH 5107 [0.5 credit] (MCG 5317)

Experimental Stress Analysis

Introduction to theory of elasticity. Photo-elasticity: types of polariscopes, two- and three-dimensional stress fields, frozen patterns. Photoelastic coatings. Strain gauges; gauge factors, sensitivity, calibration, and temperature compensation. Moire fringes, brittle lacquers, mechanical strain gauges.

MECH 5201 [0.5 credit] (MCG 5321)

Methods of Energy Conversion

Technical, economic and environmental aspects of present and proposed large-scale systems of energy conversion.

MECH 5202 [0.5 credit] (MCG 5122)

Smart Structures

Structural dynamics principles: modal analysis and wave propagation. Linear time invariant systems: feedback, feedforward, SISO, MIMO, digital and adaptive filters. 'Smart' Structures: multifunctional materials, collocation principles, geometric filtering, and control authority. Applications in aero-acoustics and aeroelasticity.

Precludes additional credit for MECH 5807 (if taken 2001-2002 to 2003-2004).

MECH 5300 [0.5 credit] (MCG 5330)

Engineering Acoustics

Review of acoustic waves in compressible fluids; acoustic pressure, intensity and impedance; physical interpretation and measurement; transmission through media; layers, in-homogeneous media, solids; acoustic systems; rooms, ducts, resonators, mufflers, properties of transducers; microphones, loudspeakers, computational acoustics.

MECH 5301 [0.5 credit] (MCG 5331)

Aeroacoustics

The convected wave equation; theory of subsonic and supersonic jet noise; propeller and helicopter noise; fan and compressor noise; boundary layer noise, interior noise; propagation in the atmosphere; sonic boom; impact on environment.

MECH 5302 [0.5 credit] (MCG 5332)

Instrumentation Techniques

An introduction for the non-specialists to the concepts of digital and analog electronics with emphasis on data acquisition, processing and analysis. Topics covered include operational amplifiers, signal processing, digital logic systems, computer interfacing, noise in electronic systems. Hands-on sessions illustrate theory and practice.

MECH 5304 [0.5 credit] (MCG 5334)

Computational Fluid Dynamics of Compressible Flows

Solution techniques for parabolic, elliptic and hyperbolic equations developed for problems of interest to fluid dynamics with appropriate stability considerations. A staged approach to solution of full Euler and Navier-Stokes equations is used. Grid generation techniques appropriate for compressible flows are introduced.

MECH 5400 [0.5 credit] (MCG 5344)

Gas Turbine Combustion

Combustion fundamentals and gas turbine combustor design. Combustion fundamentals include fuel evaporation, chemistry of combustion, chemical kinetics and emissions formation and introduction to computational combustion modelling. Combustor design addresses the interrelationship between operational requirements and combustion fundamentals.

Precludes additional credit for MECH 5800 (MCG 5480) when MECH 5800 was offered with this topic.

MECH 5401 [0.5 credit] (MCG 5341)

Turbomachinery

Types of machines. Similarity: performance parameters; characteristics; cavitation. Velocity triangles. Euler equation: impulse and reaction. Radial pumps and compressors: analysis, design and operation. Axial pumps and compressors: cascade and blade-element methods; staging; off-design performance; stall and surge. Axial turbines. Current design practice. Also offered at the undergraduate level, with different requirements, as MECH 4305, for which additional credit is precluded.

MECH 5402 [0.5 credit] (MCG 5342)

Gas Turbines

Interrelationship among thermodynamic, aerodynamic, and mechanical design. Ideal and real cycle calculations. Cycle optimization; turbo-shaft, turbojet, turbofan. Component performance. Off-design performance; matching of compressor, turbine, nozzle. Twin-spool matching.

MECH 5403 [0.5 credit] (MCG 5343)

Advanced Thermodynamics

The course covers three major topics: review of fundamentals from a consistent viewpoint, properties and equations of state, and applications and special topics. The third topic includes an introduction to statistical thermodynamics.

MECH 5407 [0.5 credit] (MCG 5347)

Conductive and Radiative Heat Transfer

Analytical, numerical and analog solutions to steady-state and transient conduction heat transfer in multi-dimensional systems. Radiative heat exchange between black, grey, non-grey diffusive and specular surfaces, including effects of athermanous media.

MECH 5408 [0.5 credit] (MCG 5348)

Convective Heat and Mass Transfer

Analogies between heat, mass and momentum transfer. Forced and free convection relations for laminar and turbulent flows analytically developed where possible and otherwise deduced from experimental results, for simple shapes and in heat exchangers. Mass transfer theory and applications.

MECH 5500 [0.5 credit] (MCG 5350)

Advanced Vibration Analysis

General theory of continuous and discrete multi-degree-of-freedom vibrating systems. Emphasis on numerical techniques of solving complex vibrating systems, with selected applications from aerospace, civil, and mechanical engineering.

MECH 5501 [0.5 credit] (MCG 5125)

Advanced Dynamics

Developing and applying the governing equations of motion for discrete and continuous mechanical systems. Includes Newton-Euler and Lagrangian formulations; classical and finite element approaches for continuous systems; and linear stability, frequency response, and propagation solution methods.

Precludes additional credit for MECH 5500 (if taken 2001-2002, 2002-2003).

MECH 5502 [0.5 credit] (MCG 5352)

Optimal Control Systems

Review of transfer function and state-space system descriptions. Elements of the optimal control problem. Variational calculus. Optimal state feedback control. Riccati equations. Optimal observers and Kalman-Bucy Filters. Extension to discrete time systems including an introduction to dynamic programming. Practical applications are emphasized throughout the course.

MECH 5503 [0.5 credit] (MCG 5353)

Robotics

The history of and introduction to robotics methodology. Robots and manipulators; homogeneous transformation, kinematic equations, solving kinematic equations, differential relationships, motion trajectories, dynamics. Control; feedback control, compliance, servomotors, actuators, external and internal sensors, grippers and vision systems. Microprocessors and their application to robot control. Programming.

MECH 5504 [0.5 credit] (MCG 5354)

Guidance, Navigation and Control

Guidance system classification, flight control systems, targeting, target tracking, sensing. Modern multivariable control analysis; design requirements, sensitivity, robustness, perturbations, performance analysis. Modern filtering and estimation techniques. Terrestrial navigation; tactical air navigation (TACAN), star trackers Guidance mission and performance. Aircraft, missile and spacecraft guidance and control.

MECH 5505 [0.5 credit] (MCG 5355)

Stability Theory and Applications

Fundamental concepts and characteristics of modern stability definitions. Sensitivity and variational equations; linear variational equations; phase space analysis; Lyapunov's direct method. Autonomous and nonautonomous systems; stability in first approximation; the effect of force type on stability; frequency method.

MECH 5506 [0.5 credit] (MCG 5356)

Neuro and Fuzzy Control

Knowledge-based controllers. Fuzzy control: mathematics, relations, operations, approximate reasoning. Fuzzy knowledge base control and structure. Fuzzification, inference engine, defuzzification. Nonlinear, adaptive fuzzy control systems. Stability, Neuro-control: processing, learning. Adaptation of artificial neural systems: associative memories, algorithms, applications, and network implementation. Neurofuzzy systems: industrial applications.

Precludes additional credit for EACJ 5709 (ELG 5196).

MECH 5507 [0.5 credit] (MCG 5124)

Advanced Kinematics

Algebraic-geometry applications: kinematic calibration of serial and in-parallel robots; kinematic synthesis of planar, spherical, spatial mechanisms. Various DH-parametrisations, Jacobian formulations. Topics in: projective geometry; Cayley-Klein geometries; Pl<0x00FC>cker line coordinates; Gröbner bases; Grassmannians; kinematic mapping; Burmester theory. Emphasis on practical applications.

MECH 5601 [0.5 credit] (MCG 5361)

Creative Problem Solving and Design

Problem-solving processes and how they can be applied in engineering design. Emphasis on learning methodologies rather than accumulating information. Techniques can be successfully applied in any engineering specialty. (Also listed as IDES 5301.)

MECH 5602 [0.5 credit] (MCG 5362)

Failure Prevention (Fracture Mechanics and Fatigue)

Design of engineering structures to ensure against failure due to fatigue or brittle fracture. Nature of fatigue and brittle fracture; selection of suitable material, geometry, and inspection procedures for the load and environmental conditions.

MECH 5603 [0.5 credit] (MCG 5381)

Lightweight Structures

Structural behaviour. Fundamentals of basic elasticity. Energy methods of structural analysis. Bending, shear, and torsion of open and closed multicell structures. Bending of plates. Structural idealization and its effects on open and closed sections. Structural stability.

MECH 5604 [0.5 credit] (MCG 5364)

Computational Metallurgy

Development of microstructure in alloys in solidification processes and post-solidification processing. Nucleation and growth of solid phase. Formation of a dendrite structure, macro and micro segregations. Pore formation in castings. Thermodynamic and kinetics of phase transformations and structure evolution in solid alloys.

MECH 5605 [0.5 credit] (MCG 5365)

Finite Element Analysis I

An introduction to the finite element methodology, with emphasis on applications to heat transfer, fluid flow and stress analysis. The basic concepts of Galerkin's method, interpolation, numerical integration, and isoparametric elements are taught using simple examples.

MECH 5606 [0.5 credit] (MCG 5366)

Finite Element Analysis II

Time marching heat flow problems with linear and nonlinear analysis. Static plasticity. Time-dependent deformation problems; viscoplasticity, viscoelasticity, and dynamic analysis. Isoparametric elements and numerical integration are used throughout.

MECH 5607 [0.5 credit] (MCG 5367)

The Boundary Element Method (BEM)

Integral equations. The BIE for potential theory and for elastostatics in two-dimensions. Boundary elements and numerical integration schemes. Practical applications.

MECH 5609 [0.5 credit] (MCG 5123)

Microstructure and Properties of Materials

Essential microstructural features of metals and alloys: crystal structure, dislocations, grain boundaries. The importance of these features in controlling mechanical properties is emphasized. Analytical techniques observing microstructure in metals and other materials: TEM, SEM, electron diffraction, spectrometry.

Precludes additional credit for MECH 5804 (if taken 2002-2003, 2003-2004)

MECH 5700 [0.5 credit] (MCG 5345)

Surfaces and Coatings

Surface characteristics of solid materials and surface degradation/failure mechanisms including wear, fretting, oxidation, corrosion, and erosion are introduced. Coating methods including PVD, CVD, laser, thermal spray and electrochemical deposition are discussed in the context of failure prevention measures.

MECH 5701 [0.5 credit] (MCG 5369)

Metallic Phases & Transformations

Thermodynamics of crystals, phase diagrams, principles of alloy phases, thermal analysis. Transformation rate and mechanisms. Short and long range diffusional transformations, diffusionless transformations. Phase transformations in engineering systems.
Precludes additional credit for MECH 5608 if taken during 2001-2002 or during 2005-2006.

Prerequisite: MECH 2700 or the equivalent.

MECH 5704 [0.5 credit] (MCG 5374)

Integrated Manufacturing Systems (CIMS)

Topics essential to CIMS including computer graphics, geometric modeling, numerically controlled machining, and flexible manufacturing. The fundamental data structures and procedures for computerization of engineering design, analysis and production. Also offered at the undergraduate level, with different requirements, as MECH 4704, for which additional credit is precluded.

MECH 5705 [0.5 credit] (MCG 5375)

CAD/CAM

Computer aided design and manufacturing methodology through hands-on experience and state-of-the-art software. Topics include mathematical representation, solid modeling, drafting, mechanical assembly, mechanism design and CNC machining. CAD data exchange standards, rapid prototyping, concurrent engineering and design for X are also discussed.

MECH 5800 [0.5 credit] (MCG 5480)

Special Topics in Mechanical and Aerospace Engineering

Topic will vary from year to year.

MECH 5801 [0.5 credit] (MCG 5489)

Special Topics in Mechanical and Aerospace Engineering

Topic will vary from year to year.

MECH 5802 [0.5 credit] (MCG 5483)

Special Topics in Mechanical and Aerospace Engineering

Topic will vary from year to year.

MECH 5803 [0.5 credit] (MCG 5488)

Special Topics in Mechanical and Aerospace Engineering

Topic will vary from year to year.

MECH 5804 [0.5 credit] (MCG 5384)

Special Topics in Mechanical and Aerospace Engineering

Topic will vary from year to year.

MECH 5805 [0.5 credit] (MCG 5482)

Special Topics in Mechanical and Aerospace Engineering

Topic will vary from year to year.

MECH 5806 [0.5 credit] (MCG 5486)

Special Topics in Mechanical and Aerospace Engineering

 Topic will vary from year to year.

MECH 5807 [0.5 credit] (MCG 5387I)

Special Topics in Mechanical and Aerospace Engineering

Topic will vary from year to year.

MECH 5808 (0.5 credit) (MCG 5376)

Special Topics in Mechanical and Aerospace Engineering

Topic will vary from year to year.

MECH 5809 [0.5 credit] (MCG 5382)

Special Topics in Mechanical and Aerospace Engineering

Topic will vary from year to year.

MECH 5906 [0.5 credit] (MCG 5395)

Directed Studies

MECH 5908 [1.5 credits] (MCG 5398)

Independent Engineering Study

Students pursuing a master's degree by course work carry out an independent study, analysis, and solution of an engineering problem or design project. The results are given in the form of a written report and presented at a departmental seminar. Carried out under the general direction of a faculty member.

MECH 5909 [2.0 credits]

M.A. Sc. Thesis

MECH 6909 [8.5 credits]

Ph.D. Thesis

Other Courses of Particular Interest

Civil and Environmental Engineering
CIVE 5101, CIVE 5102, CIVE 5103, CIVE 5204, CIVE 5304, CIVE 5602

Mathematics and Statistics
MATH 4806 Numerical Analysis
MATH 5806

Physics
PHYS 4407 Statistical Physics
PHYS 5101

Systems and Computer Engineering
SYSC 5001, SYSC 5004, SYSC 5005, SYSC 5401, SYSC 5402, SYSC 5502, SYSC 5503